Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | For Pharma Industry |
Voltage | 220V |
Water Supply | 2lt/min |
Water Flow Measurement | Rotameter, (10 - 100)LPH |
Country of Origin | Made in India |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Phase | SINGLE PHASE |
Material | STAINLESS STEEL |
Flow Type | Parallel Flow |
Digital Voltmeter | 0-200 V |
Length | 500 mm (approx |
The Unit consists of a strong cylinder containing fluid. A water cooled coil in the upper part of the cylinder condenses the vapour and return sit to the boiling liquid. The condenser cooling water rate can be measured and controlled also.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Payment Mode | NA |
Service Type | Installation |
Kind Of Application | lab equipment |
Duration | NA |
Services For | boiling |
Features | To determine the overall Heat Transfer Co-efficient and film co-efficient for vertical and horizon |
Shell & Tube type condensers are widely used in various industries. The present set-up offers a comparative study of Vertical & Horizontal condenser, which can be operated one at a time. Condenser consists of Stainless steel shell, with stainless steel tubes. Cold fluid flows through inside the tubes and steam flows through the shell. Valves are provided to control the flow rates of cold fluids. Flow rate of cold water is measured using a Rota meter. Shell is fitted with steam traps from where condensate is collected in measuring cylinder. Temperature of inlet and outlet of both hot & cold fluids are measured by temperature sensors.
Additional Information:
Product Details:
Usage/Application | lab equipment |
Material | stainless steel |
Brand | Innovative Research Equipments |
Medium Used | Water, Air |
Power Source | Electric |
Voltage | 220 V |
Frequency | 50 Hz |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Country of Origin | Made in India |
Usage/Application | lab equipment |
Material | STAINLESS STEEL |
Inlet Temperature | 85 DegreeC |
I Deal In | New Only |
Tube to Tube Sheet Joint | Dia 32 mm approx., Length 500mm. (Made of Stainless Steel) |
Outlet Temperature | 85 DegreeC |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Voltage | 220v ac |
Medium Used | Water |
Heat exchangers are widely used in various industries. Finned tube Heat Exchanger is a Tube-in-tube type heat exchanger. The inner tube is of Stainless steel with fins on its outside surface. Hot water flows through inner tube and cold fluid flows through the outer tube. The flow rate of hot & cold fluid is measured with the help of rotameters. Inlet and outlet temperatures of fluids are measured with the help of digital temperature indicators. A magnetic drive pump is used to circulate the hot water from a recycled type water tank, which is fitted with heaters and Digital Temperature Controller.
Additional Information:
4/5
Reviewed by 11 Users
Most Relevant Reviews