Heat Transfer Laboratory equipments

Product Details:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Delivery Time: 10 days
• Packaging Details: wooden crates

Product Details:

In most industrial processes including reactors, heat is to be added or extracted to control the process. The addition and removal of heat is done by passing steam or water in a jacket fitted to the outside of the vessel or passing steam or cold water in helical coil inside the vessel. For effective heat transfer and even distribution of heat, the liquid inside is continuously agitated. The present set-up offers us a comparative study of Jacket & Helical coil, which can be operated simultaneously. It is a stainless steel jacketed vessel with helical coil of copper is fitted inside. A variable speed stirrer is fitted in the vessel. Variation in temperature of inside water is measured and is noted. Set-up is fitted with steam traps for condensate collection. Flow rate of water can be controlled and measured using valve and Rota meter. Temperature of inlet and outlet of both hot & cold fluids are measured by temperature sensors.

Additional Information:

• Item Code: IRE-HTAV-00
• Production Capacity: 10
• Delivery Time: 30 DAYS
• Packaging Details: WOODEN CRATE

Product Details:

The set up consists of a glass column filled with and. Air is fed at the bottom of the column. Flow rate of air is measured using orifice meter and manometer. A heater in the form of cylinder is placed in the bed to heat the .The heater input can be controlled by the Digital Temperature Controller. Temperature sensors are provided to measure the temperature of air in let and air outlet.

Additional Information:

• Item Code: IRE-FBH56
• Production Capacity: 9
• Delivery Time: 30 DAYS

Product Details:

The Refrigeration Test Rig unit is required to conduct experiments and demonstrate the process of cooling of water. The setup consists of a Compressor, Condenser & Evaporator. A suitable water tank with heating arrangement is provided. Temperature at various points is measured with the help of sensors. For pressure measurement, pressure transmitter at inlet and outlet of compressor is provided. Data acquisition for temperature, pressure at suitable points is provided.

The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by Innovative Research Equipments. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Additional Information:

• Item Code: IRE-CCR-65
• Production Capacity: 10
• Delivery Time: 30 DAYS

Product Details:

The Window Air Conditioning Test Rig unit is required to conduct experiments and demonstrate the process of cooling of atmospheric air. The unit will be fitted with all instruments facilities so that temperature, pressure etc. may be measured at different points in the air conditioning system.

Additional Information:

• Item Code: IRE-WAC-23
• Production Capacity: 10
• Delivery Time: 30 DAYS

Product Details:

Evaporation deals with the concentration of a non-volatile solute from a solution by the removal of required amount of volatile solvent. Usually the solvent is water. By vaporizing apart of the solvent, use ful product i.e. the concentrated solution or thick liquor is produced and the vapour is discarded. Long tube evaporators are usually used for the concentration of foamy liquids. The set-up is consist soft evaporators fitted in series. Each is made up of Stainless Steel tubes surrounded by a Stainless Steel jacket and fitted with accumulator. Dilute solution is feed to the first evaporator. Steam from a steam generator is supplied to evaporator to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected attheend of trap. The vapour so volatile solvent produced in first evaporator are supplied to the second evaporator. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator is recycled through the evaporator.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Packaging Details: wooden crates