Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Innovative Research Equipments |
Material | Stainless steel |
Automation Grade | Semi-Automatic |
Size | 1000 X 700 X 1200 mm |
Capacity | 3 ltrs |
Display | Digital |
Phase | Single Phase |
Weight | 50 kg |
Packaging Type | Wooden Crates |
Power | 0.5 kW |
Power Supply | 220 V |
Pressure Gauge | 0-2 Kg/cm2 |
Accuracy | 99 % |
Model Number | IRE15 |
Voltage | 220 V |
Compressed Air Supply | 2 Bar,0.25 CFM |
Feed Tank | 20 L |
Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be adjusted by operating the needle valve and measured by Rotameter. The compressed air is used for circulation of feed. The continuously stirred tank reactor made of Stainless Steel is provided for understanding the R.T.D. characteristics. Pressure Regulator & Pressure Gauge are fitted in the compressed air line.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Max Pressure | 0-3 kg |
Material of Construction | Stainless Steel |
Automation Grade | Semi-Automatic |
Flow Measurement | Rotameter |
Features | Horizontal Orientation |
Max Temperature | 60 Deg C |
Tank Capacity | 20 L |
Pressure Regulator | 0 - 2 Kg/cm2 |
Compressed Air Supply | 2 Bar, 0.25 CFM |
Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be adjusted by operating the needle valve and measured by Rotameter. The compressed air is used for circulation of feed. It is a helical coil tube type plug flow reactor made up of Stainless steel pipe. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis.For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is provided. Pressure Regulator & Pressure Gauge are fitted in the compressed air line.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Max Pressure | 0-3 kg |
Material | Stainless Steel |
Capacity | <1 KL |
Automation Grade | Manual |
Flow Measurement | Rotameter |
Max Temperature | 65 Deg C |
Inner Diameter | 9.5 MM |
Outer Diameter | 12.7 MM |
Power | NA |
In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. It is a helical coil tube type reactor kept in a constant temperature water bath to conduct the experiment at various temperatures. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 20 LTR |
Material | Borosilicate Glass |
Usage/Application | Chemical Industry |
Max Pressure | 0-2 KG |
Flow Measurement | Rotameter 2 Nos. (one each for Reactants |
Warranty | 1 YEAR |
I Deal In | New Only |
Tank Capacity | 20 LTR |
Country of Origin | Made in India |
In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. This set-up is used to study a non-catalytic homogeneous reaction under ambient condition.
The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. A straight tube type reactor kept horizontally and inclined upward at outlet from where samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.
Additional Information: