Thermal Engineering Laboratory Equipment

Product Details:

This apparatus is designed to determine the thermal conductivity of insulating powder. The apparatus consists of two thin walled concentric copper spheres.  Inner sphere houses Nichrome Wire heater. Insulating powder is filled between the two spheres.  Heat flows radically outwards. Temperature sensors at proper positions are fitted to measure surface temperatures of spheres.   Heat input to the heater is given through a variac and measured by Digital Voltmeter & Digital Ammeter.  By varying the heat input rates, data can be obtained.

Additional Information:

• Item Code: IRE-TC-10
• Production Capacity: 10
• Delivery Time: 30 DAYS
• Packaging Details: WOODEN CRATE

Product Details:

A batch reactor is a closed system with no input and output streams. A batch reactor can operate under conditions like Isothermal (Temperature of Reaction Mass remains constant), Perfectly mixed  (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition.  The set up consists of a Reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90C with the help of Digital Temperature indicator Cum Controller. Samples can be taken out with the help of a sampling pipette.

Additional Information:

• Item Code: IRE-EM-23
• Production Capacity: 10
• Delivery Time: 30 DAYS

Product Details:

The apparatus consists of two pipelines emerging out from a common manifold.  pipe line contains a Venturimeter. The pressure tapings from the Venturimeter are taken to differential manometer to measure pressure difference. The Venturimeter can be put in operation by operating valves provided at the downstream. The flow can also be regulated by these valves.  Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

Additional Information:

• Item Code: IRE-40
• Production Capacity: NA
• Delivery Time: 40 DAYS

Product Details:

The apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a FHP Motor. The bearing is freely supported on the shaft and sealed at the motor end. The speed of the motor is controlled by the speed control unit. One compound pressure gauge is mounted on bearing to measure the pressure at different position around the circumference. Bearing is free to rotate and can be adjusted at any position of circular scale. The bearing can be loaded by attaching weights to the arm supported beneath it.

Additional Information:

• Item Code: IRE-JB-96
• Production Capacity: 10
• Delivery Time: 30 DAYS

Product Details:

Technical Description:

The apparatus is designed to determine thermal conductivity of different liquids. The apparatus consists of a heater. The heater heats a thin layer of liquid. A cooling plate removes heat through liquid layer, ensuring unidirectional heat flow. Temperature is measured across the liquid layer and complete assembly is properly insulated. A proper arrangement for changing the liquids is provided. The whole assembly is kept in a chamber.

Additional Information:

• Item Code: ire-232
• Delivery Time: 40 days

Product Details:

Heat exchanger is a device in which heat is transferred from one fluid to another. The apparatus consists of a concentric tube heat exchanger. Hot water flows through inner tube in one direction only and cold water flows through the outer tubes. Direction of cold fluid flow can be changed from parallel or counter to hot water so that unit can be operated as parallel or counter flow heat exchanger. Flow rates of hot and cold water are measured using Rota meters. A magnetic drive pump is used to circulate the hot water from a re-cycled type water tank, which is fitted with heaters and Digital Temperature Controller.

Additional Information:

• Item Code: IRE-PCF3
• Production Capacity: 10
• Delivery Time: 30 DAYS

Product Details:

Technical Description:

The apparatus is designed to determine the Stefan Boltzmann constant.  The apparatus consists of a hemisphere fixed to a Bakelite plate, the outer surface of which forms the jacket to heat it.Hot water to heat the hemisphere is obtained form a hot water tank, which is fixed above the hemisphere. The copper test disc is introduced at the center of hemisphere.  The temperatures of hemisphere and test disc are measured with the help of temperature Sensors.

Additional Information:

• Item Code: IRE-SBA21
• Production Capacity: 9
• Delivery Time: 30 DAYS

Product Details:

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.

Additional Information:

• Item Code: IRE-4C4S-22
• Production Capacity: 10
• Delivery Time: 30 DAYS