Product Details:
Type | INNOVATIVE RESEARCH EQUIPMENT |
Phase | 3 PHASE |
Material | STAINLESS ATEEL |
Voltage | 440V |
Speed | 1000 RPM (Approx.) |
Floor Area Required | 1.5m x 0.75m |
RPM | 1000 |
Pelton Wheel Turbine is only impulse water turbine now in common use named in honour of Sir L. A. Pelton (1829-1908) of California, USA. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the inlet of the turbine is only kinetic energy. The pressure at the inlet and outlet of the turbine is atmospheric. This turbine is used for high heads. The present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with a SS spear, by means of Centrifugal Pump, tangentially to the runner. Flow of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine.
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Laboratory |
Material | COPPER |
Dimension | 25 mm Insulating shell |
Warranty | 1 |
Phase | SINGLE |
Brand | innovative research equipment |
Temperature Accuracy | Indicator: 0-199.90C, with multi-channel switch |
Country of Origin | Made in India |
The experimental set up consists of metal bar, one end of which is heated by an electric heater while the other end of the bar projects inside the cooling water jacket. A cylindrical shell filled with insulating material surrounds the middle portion of the bar. The temperature of the bar is measured at different sections. Heat Input to the heater is given through variac. By varying the heat input rates, data can be obtained. Water at constant rate is circulated through the jacket and its flow rate and temperature rise is noted.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQIPMENT |
Usage/Application | LAB EXPERIMENT |
Material | Borosilicate Glass |
Phase | Single Phase |
Model Name/Number | IRE-PD-2 |
Size | Glass Dia : 1", Length 900mm Approx. |
Color | BLUE |
Capacity | 60 ltr |
Dimensions | Glass Dia : 1", Length 900mm Approx. |
Country of Origin | Made in India |
Additional Information:
Product Details:
Cylinder | 4 |
Usage/Application | lab equipment |
Brand | INNOVATIVE RESEARCH EQUIPMENTS |
Material | stainless steal |
Power Source | electric |
Product Details:
Usage/Application | lab equipment |
Brand | INNOVATIVE RESEARCH EQUIPMENTS |
Body Material | stainless steal |
Number Of Stroke | 4 |
Power Source | electric |
Voltage | 220v |
Product Details:
Minimum Order Quantity | 1 Piece |
Type | innovative research equipments |
Usage/Application | LAB EXPERIMENT |
Speed | 2800 RPM (max.), Head 12 m (max.) |
Motor | Kirloskar Make, Capacity 1 HP |
Drive Type | 1 HP DC Motor with Thyristor controlled DC drive for variable speed |
The present Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Centrifugal pump coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of water is measured by using measuring tank and stopwatch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.
Additional Information:
Product Details:
Type | innovative research equipments |
Material | STAINLESS STEEL |
Power | Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth |
Pressure Gauge | : Bourdon type |
Floor Area Required | 1.5 x 0.75 m. |
Oil Pressure | SAE 20W 40(30 lt.) |
The present Gear Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Gear Pump having a pair of meshed gears, coupled with DC Motor. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of fluid is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.
Product Details:
Type | innovative research equipments |
Material | STAINLESS STEEL |
Power | Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth |
Pressure Gauge | Bourdon type |
Oil Pressure | SAE 20W 40(30 lt.) |
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQIPMENT |
Usage/Application | LAB EXPERIMENT |
Material | Stainless Steel |
Phase | Single Phase |
Country of Origin | Made in India |
The apparatus is in two parts namely–1. Experimental Set up and 2. Analogue Field Plotter.
The Experimental set up consists of a transparent tank of 400 -450 mm. area and 75 mm depth. In this tank the model understudy is to be installed. The model is to be designed as per the requirements out of copper and Bakelite plates. A sample model arrangement will be given with setup.
A Probe is mounted on a trolley, which can traverse in two planes fitted on tray to locate equipotential lines. X – Y Co- ordinates of the probe a teach point can be located on the scale fitted on the cross slide.
Necessary potential can be given with the help of Analogue Field Plotter can be displayed on the m eter provided.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Laboratory |
Material | stainless seel |
Warranty | 1 |
Current | 220 V AC, 2 Amp |
Phase | SINGLE |
I Deal In | New Only |
Brand | innovative research equipment |
Digital Voltmeter Volt | 0-300 Volt |
Country of Origin | Made in India |
The set-up is designed to determine thermal conductivity of insulating materials in the form of slab. The apparatus consists of main central heater and ring guard heater, sandwiched between the specimens. Cooling plates are provided on either side of the specimen. Two identical specimens are clamped between heater that ensures unidirectional heat flow through specimen. The whole assembly is kept in chamber and insulated by ceramic wool insulation around the set-up.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | STAINLESS STEEL |
Usage/Application | For Pharma Industry |
Flow Type | NATURAL CONVECTION |
Medium Used | ELECTRIC POWER |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Current | 220V |
Diameter | 38 mm (approx). |
Digital Voltmeter | 0-300 Volt. |
Length | 500 mm (approx |
Phase | SINGLE PHASE |
Country of Origin | Made in India |
Additional Information:
Product Details:
Usage/Application | Industrial |
Material | STAINLESS STEEL |
Brand | INNOVATIVE EQUIPMENT RESEARCH |
Glass Thickness | OD 12.7mm |
Length | Length of tubes 500mm |
I Deal In | New Only |
Country of Origin | Made in India |
Shell & Tube type condensers are widely used in various industries. The present set-up offers a comparative study of Vertical & Horizontal condenser, which can be operated one at a time. Condenser consists of Stainless steel shell, with stainless steel tubes. Cold fluid flows through inside the tubes and steam flows through the shell. Valves are provided to control the flow rates of cold fluids. Flow rate of cold water is measured using a Rota meter. Shell is fitted with steam traps from where condensate is collected in measuring cylinder. Temperature of inlet and outlet of both hot & cold fluids are measured by temperature sensors.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQIPMENT |
Usage/Application | LAB EXPERIMENT |
Material | Stainless Steel |
Phase | Single Phase |
Size | Dia 45 mm, Height 1000 mm |
Color | BROWN |
Pilot Tube (With Manometer) | NA |
Auxiliary Power Supply | NA |
Mains Supply | 220V |
Power Source | NA |
Good Quality | NA |
Country of Origin | Made in India |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Power Supply | AC |
Phase | SINGLE |
Voltage | 220V |
Power | Single Phase, 220 V AC, 50 Hz,5-15Amp |
Type | Air Compressor Test Rig |
Usage/Application | Laboratory Equipment |
Material | stainless steal |
Compressor Type | reciprocating type. |
Number Of Phases | Single phase |
Space Required | 1.5 m x 1m |
Evaporator Type | Coil Type evaporator with facility to determine Performance efficiency ratio(PER) |
Floor Area Required | 1.5 m x 1m |
I Deal In | New Only |
Current | 220V |
Brand | INNOVATINE RESEARCH EQUIPMENT |
Country of Origin | Made in India |
This set up demonstrates the students about the basic principal of a vapour absorption refrigeration cycle. The test rigid designed for the study of the rmo dynamics of vapor absorption refrigeration cycle by measuring temperature at different position.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQIPMENT |
Usage/Application | LAB EXPERIMENT |
Material | Stainless Steel |
Phase | Single Phase |
Color | BLUE |
Auxiliary Power Supply | 220 V, Single Phase, 0.5 kW |
Mains Supply | 220 V, Single Phase, 0.5 kW |
Power Source | NA |
Rotating Arms | NA |
Country of Origin | Made in India |
Gear Train is any combination of gear wheels by which motion is transmitted from one shaft to another shaft. In epicyclic gear trains, the axes of shafts on which the gears are mounted may move relative to a fixed axis.
It is a motorized unit consisting of a SUN gear mounted on input shaft. Planet gears meshes with the annular gear. These planet gears are mounted on a common arm to which output shaft is fitted. Loading arrangement is provided for loading the system and to measure holding torque.
The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by INNOVATIVE RESEARCH EQUIPMENTS . This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Model | IRE-EGT-45 |
Capacity | NA |
Application | LAB EXPERIMENT |
Power | 220V AC 1 PHASE |
Type | NA |
Country of Origin | Made in India |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Model | IRE-RBR-65 |
Capacity | NA |
Application | LAB EXPERIMENT |
Power | 220V AC 1 PHASE |
Type | NA |
Country of Origin | Made in India |
The setup consists of catalyst packed column of Stainless Steel. Reactant from a fed tank is fed to the reactor through liquid distributor, fitted at one end of the column. Some part of product is recycled to the reactor using a low capacity sophisticated pump or by over head tank system. Rotameters are provided to measure the flow of feed & recycled product. The feed rate and recycle product ratio can be manipulated by the respective needle valves of the rotameter. Samples can be taken periodically from the top outlet of reactor at another end. An arrangement is made to carryout the reaction at Isothermal conditions by circulating the hot water in the outer jacket of the packed bed reactor. Special care is taken for proper mixing of feed & recycle product before its entry to the reactor. A magnetic drive pump made up of poly propylene is used for circulation of feed
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQIPMENT |
Usage/Application | LAB EXPERIMENT |
Material | Stainless Steel |
Phase | Single Phase |
Model Name/Number | IRE-DBFC-53 |
Size | ID: 100 mm |
Color | SILVER |
Capacity | 200 LTR |
Country of Origin | Made in India |
The present set-up is designed to study the characteristics of a filter column. It consists of a column filled with packing to ensure the good water distribution. 20 Slotted pressure tapings are mounted on the column for measuring the pressure drop across the bed per unit length. These tapings are connected to a
Differential manometer. These tapings can also be used for drawing the samples from the column and change in concentration of the suspension can be determined. The unit is complete with 2 Nos. of feed tanks. A centrifugal pump is provided to circulate the water through the column. Water supplied to the column is regulated and controlled by Rota meter.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Model | IRE-FE-245 |
Capacity | 1 LTR |
Application | LAB EXPERIMENT |
Power | 220V AC 1 PHASE |
Country of Origin | Made in India |
The present set-up is designed to conduct the flocculation test in the laboratory. The test is called as “Jar Test” which is routinely performed by the water treatment operators in the industry. The laboratory scale unit of Flocculation test unit consists of 6 Nos. of Glass Flocculating vessels. These are provided on a translucent base which is illuminated from bottom by a florescent lamp. Each vessel is provided with a separate stirrer. A Paddle type SS Impeller is fixed on the stirrer shaft and the speed of the impellers can be regulated with the provided speed controller. All stirrers are driven with one motor. This paddle assembly can be easily removed for the cleaning purpose.
Additional Information:
Product Details:
Minimum Order Quantity | 1 PIECE |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Model | IRE-MO-22 |
Capacity | 75 LTR |
Type | LAB EQUIPMENT |
Power | Single phase, 220 V AC, 3.5 kW |
Application | LAB EXPERIMENT |
Country of Origin | Made in India |
The most common types of continuous vacuum filter are the rotary drum filter. A horizontal drum with a slotted face turns at less than 2 RPM in an agitated slurry trough. A filter medium, such as canvas, covers the face of drum, which is partly submerged in the liquid. Under the slotted cylindrical face of the main drum is a second, smaller drum with a solid surface. Between the two drums are radial partitions dividing the annular space into separate compartments, each connected by an internal pipe to one hole in the rotating plate of the rotary valve Vacuum and air are alternately applied to each compartment as the drum rotates.The set-up consists of stainless steel drum moving in gunmetal brackets and is divided in 6 compartments, covered by a Stainless Steel mesh. A canvas filter is used for filtration. The whole assembly is fitted with a SS trough in which a agitator is provided. To make the unit a self-contained a slurry mixing and feed arrangement, receiver tanks, vacuum pump, control panel are provided.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQIPMENT |
Usage/Application | LAB EXPERIMENT |
Material | Stainless Steel |
Phase | Single Phase |
Country of Origin | Made in India |
The set-up consists of a cylindrical test section filled with pourous medium. Pressure tappings are provided in the test section to measure the pressure drop with the help of differential manometer. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and bypass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of rotameter.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Country of Origin | Made in India |
The setup is designed to study dynamic response of single and multi capacity processes when connected in interacting and non-interacting mode. It is combined unit to study 1) Single capacity process. 2) Non interacting process
and 3) Interacting process. The observed step response of the tank level in different mode can be compared with mathematically predicted response. Setup consists of supply tank, pump for water circulation, Rotameter for flow
measurement, process tanks with scales, which can be connected to interacting and non-interacting mode. The components are assembled on frame to form tabletop set-up.
Additional Information:
Product Details:
Material | STAINLESS STEEL |
Drive | 1HP Crompton make motor having Step Cone Pulley for Three different speeds |
Floor Area Required | 1.5 m x 0.75 m |
Motor Power | Double acting, Single Cylinder, Capacity 1 HP |
Power Supply | Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection. |
Speed | 250 RPM (max.) and Head 5 kg/cm2(max.) |
The present Reciprocating Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Double acting, Single Cylinder Reciprocating Pump coupled with a AC Motor. Flow of water is measured by using measuring tank and stopwatch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQIPMENT |
Usage/Application | LAB EXPERIMENT |
Material | Stainless Steel |
Phase | Single Phase |
Country of Origin | Made in India |
The experimental set up consist of a circular transparent cylindrical tank in which four circumferential jets are placed along the circumference of the cylinder near its bottom which helps in the formation of free vortex. It is assumed that the torque exerted by these jets is negligible. A pointer can be transversed horizontally & vertically across full diameter of the vessel so that water surface profile can be measure. Both axes contain graduations so that exact position of the pointer is known. The experimental procedure involves measurement of the resulting free surface that represents the variation of the sum of the pressure head and datum head. An arrangement is provided to drain the vessel.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Type Of Crushing Machines | ROLL CRUSHER |
Material | Material Chilled Steel |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Model Name/Number | IRE-RCM7 |
Motor Type | AC Motor |
Power | 220V AC |
Warranty | 1 YEAR |
I Deal In | New Only |
Working Area Millimetre | 1 x 1m |
Diameter Mm | 200MM |
Phase | SINGLE |
Motor Power | : 2 HP motor coupled with Reduction Gear Box to give 48-70 RPM |
Dimensions | 200MM |
Voltage | 220V AC |
Country of Origin | Made in India |
The Lab setup is used to crush different sample and material. Two heavy Smooth faced chilled metal rolls turning on parallel horizontal axes are the working elements of the roll crusher. A hopper is provided at the top for feeding the material. Particles of feed caught between the rolls are broken in compression and drop out below. The rolls turn towards each other at the same speed. They have relatively narrow faces and are larger in diameter so that they can nip moderately large lumps. Loading bolts are provided for safety. The maximum size of the product is approximately equal to gap between the rolls & it can be adjusted by loading bolts.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Type | Belt |
Length | 750MM |
Application/Usage | LAB EXPERIMENT |
Voltage | 220v |
Diameter | 75mm |
Usage/Application | LAB EXPERIMENT |
Color | Metallic Grey |
Power | 220v |
Features | NA |
Motor Power | 1/2 H.P. motor coupled to a Reduction |
Surface Finish | 1 m x 2 m. |
Warranty | 1 YEAR |
I Deal In | New Only |
Country of Origin | Made in India |
The screw conveyor is one of the oldest and most versatile conveyor types. These are compact, requiring little headroom and no return mechanism. The material is also mixed as it passes through the conveyor. Screw or helical flight conveyors consists of a steel shaft having a spiral or helical fin fastened to the shaft and rotating in a trough without touching the trough, so that the helical fin pushes the material along the trough. It is fitted with a variable speed motor. Drive with a compatible reduction gearbox to run the screw conveyor at variable speed. A RPM indicator with Proximity sensor indicates the RPM of conveyor.
Additional Information:
Product Details:
Material | STAINLESS STEEL |
Drive | : 1HP DC Motor with Thyristor controlled DC Drive for variable Speed |
Floor Area Required | 1.5 m x 0.75 m |
Power Supply | Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth |
Pump Pressure | Double acting, Single Cylinder. Capacity 1 HP Speed 250 RPM (max.) and Head 5 kg/cm2 (max.) Medium F |
Speed | 1 HP |
The present Reciprocating Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Double acting, Single Cylinder Reciprocating Pump coupled with a DC Motor Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of water is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Usage/Application | LAB EXPERIMENT |
Capacity | 20 HP |
Power | OUTPUT POWER 3KW |
I Deal In | New Only |
Kaplan Turbine is an axial flow reaction turbine named in honour of Dr. B. Kaplan, a German Engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the discharge (Q) must increase to produce the same power. The present set-up consists of a scroll casing housing a runner. Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of Centrifugal Pump. The runner is directly mounted on one end of a central shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draught tube and the casing for observation of flow on to the airfoil vanes. This runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of drum brake arrangement so that the efficiency of the turbine can be calculated. The set-up is supplied with control panel. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQIPMENT |
Usage/Application | LAB EXPERIMENT |
Material | Stainless Steel |
Phase | Single Phase |
Sump Tank Capacity | 50 LTR |
The setup consists of 2 pipes of different diameters, which are connected in parallel. Pressure tapings are provided on each pipe to measure the pressure losses with the help of a Differential Manometer. Control valves are fitted on each pipe, which enables to use one pipe at a time for experiment. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve And by-pass valve are fitted in water line to conduct the Experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQIPMENT |
Usage/Application | LAB EXPERIMENT |
Material | Stainless Steel |
Phase | Single Phase |
Country of Origin | Made in India |
The experimental set up consist of a circular transparent cylindrical tank in which plate is rotated with the help of a variable speed motor so that the cylinder rotates about its vertical axis with the help of a V belt and forced vortex is formed. An upper probe can be transversed horizontally & vertically across full diameter of the vessel so that water surface profile can be measure. Both axes contain graduations so that exact position of the probe is known. The experimental procedure involves measurement of the resulting free surface that represents the variation of the sum of the pressure head and datum head. An arrangement is provided to drain the vessel.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Dimensions | 200 mm Depth 300 mm Length 2.5 m |
Phase | SINGLE |
Voltage | 220V |
Country of Origin | Made in India |
This apparatus consists of a Flow channel. Channel is fabricated from transparent Toughened Glass and Stainless Steel together. The equipment is designed to study the various phenomenon of flow with the help of various types of blocks, gates, weirs and other many types of accessories (Optional).
The channel section is transparent by which user can observe the various flow patterns of fluid in the channel and photographs can be taken. These glass panels are sealed with the stainless steel bed. The channel is fabricated in pieces of 2.5 m each. These are joined with the help of flanges. This channel is floor mounted. Instrument rail is provided along the entire working length of the flume. A scale is provided along with the rail.
At the inlet of the flume an inlet tank with stilling and smoothing device is provided for obtaining the excellent velocity profile in the test section. At the discharge side a gate is provided which have an adjustable height. This gate maintains the operating water levels for the flume. An arrangement has been done to calculate the slop of channel.
The flow channel is self-contained re-circulating unit provided with sump tank, centrifugal pump, and control valve. Water is circulated through the channel by centrifugal pump. The pump draws water from sump tank to inlet tank of flume and return back to sump after passing through the channel.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Color | GRAY |
Dimensions | 150 mm Depth:250 mm Length:5 m |
Phase | SINGLE |
Voltage | 220V |
This apparatus consists of a Flow channel. Channel is fabricated from transparent Toughened Glass and Stainless Steel together. The equipment is designed to study the various phenomenon of flow with the help of various types Of blocks, gates, weirs, and other many types of accessories (Optional). The channel section is transparent by which user can observe the various flow patterns of fluid in the channel and photographs can be taken. These glass panels are sealed with the stainless steel bed. This channel is floor mounted. Instrument rail is provided along the entire working length of the flume. A scale is provided along with the rail. A pointer gauge is provided to measure the depth of flow, that can move on the rail.
At the inlet of the flume an inlet tank with stilling and smoothing device is provided for obtaining the excellent velocity profile in the test section. At the discharge side a gate is provided which have an adjustable height. This gate maintains the operating water levels for the flume. This flume is tilted using a jacking system which has one jack. An arrangement has been done to calculate the slop of channel. The flow channel is self-contained re-circulating unit provided with sump tank, centrifugal pump, and control valve. Water is circulated through the channel by centrifugal pump. The pump draws water from sump tank to inlet tank of flume and return back to sump after passing through the channelAdditional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Model | NA |
Capacity | NA |
Application | LAB EXPERIMENT |
Power | 220V AC 1 PHASE |
Type | NA |
The set up consists of two glass column packed with Anion and Cation exchanger resin upto suitable height. The layer of glass wool is placed on bottom and top of the resin bed. The feed is allowed to enter from the bottom of first column and comes out of the top, which is again passed through the second column is same fashion. A digital conductivity meter measures the conductivity of liquid coming out of the second column. Flow rate of water is measured with the pre-calibrated rotameter. A tank with FHP pump with flow control valve and by-pass arrangement is provided for feed circulation.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | IRE-RSS |
Weight | Electronic Weighing Balance: capacity 2kg (Least count 1 gm) |
Power | 220V |
Voltage | 220V |
Capacity | 2 KG |
Motor Type | By 1/2 HP motor |
Warranty | 1 YEAR |
Color | GRAY |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Material | STAILESS ETEEL |
Dimension Mm | Compatible to sieves of 20-cm dia. (for 6-7 sieves) |
I Deal In | New Only |
Dimensions (W x D x H) | Compatible to sieves of 20-cm dia. (for 6-7 sieves) |
Country of Origin | Made in India |
The rotap sieve shaker reproduces the circular and tapping motion given to test sieves in hand sieving. The uniform, mechanical action ensures accurate and dependable test.
Using the regular height 20-cm diameter sieves, one sample can be tested on a series of six sieves of different openings, all with one operation of machine. The Rotap Sieve Shaker is simple and durably constructed and is run by a FHP motor. The running parts operate in oil. The machine is easily installed. No special foundation is required. Test Sieves are supplied at extra cost. A time switch from 0 to 60 minutes is provided
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATION RESEARCH EQUIPMENT |
Model Name/Number | IRE-CTER65 |
Material | STAINLESS ATEEL |
Display Type | Digital |
Usage/Application | Laboratory |
Type | LAB EXPERIMENT |
Power Supply Type | AC |
Temperature Range | 0-200 DegreeC |
Warranty | 1 YEAR |
Voltage | 220V |
I Deal In | New Only |
Country of Origin | Made in India |
The set up consists of constant temperature Bath with heating element. This Heat source is controlled with the help of digital temp controlleratany preset valve. A thermocouple pocket is provided to insert the thermocouple in it. Three thermocouples i.e. CR/AL, Cu-constantan ,Fe-constantan and Digital mili volt meter area lso provided .All components are assembled on a base plate to forma table top set- up.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Model | IRE-TTI-22 |
Capacity | 20 LTR |
Application | LAB EXPERIMENT |
Power | 220V AC 1 PHASE |
Type | NA |
Country of Origin | Made in India |
The setup studies behavior of multi capacity process when connected in interaction mode. It consists of supply tank, pump for water circulation, Rotameter for flow measurement, two independent process tanks with scales connected in interacting mode. The components are assembled on frame to form tabletop set-up.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Material | STAINLESS STEEL |
Software Category | MOMENTUM TRANSFER |
Model Name/Number | IRE-TN-56 |
Color | WHITE |
Communication Language | HINDI |
Power | 1 Phase,220V AC, 0.5kw |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Product Type | Digital |
Warranty | 1 YEAR |
Insulation Voltage | 220V |
Phase | SINGLE |
I Deal In | New Only |
Country of Origin | Made in India |
The setup studies behavior of multi capacity process when connected in non interaction mode. It consists of supply tank, pump for water circulation, Rota meter for flow measurement, two independent process tanks with scales connected in non-interacting mode. The components are assembled on frame to form tabletop set-up.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Material | STAINLESS STEEL |
Software Category | MOMENTUM TRANSFER |
Model Name/Number | IRE-INI-56 |
Color | WHITE ORANGE |
Communication Language | HINDI |
Power | 1 Phase,220V AC, 0.5kw |
Brand | INNOVATIVE RESEARCH EQUIPMENT |
Product Type | Digital |
Warranty | 1 YEAR |
Insulation Voltage | 220V |
Phase | SINGLE |
I Deal In | New Only |
Country of Origin | Made in India |
The setup is designed to study dynamic response of single and multi capacity processes when connected in interacting and non-interacting mode. It is combined unit to study 1) Single capacity process. 2) Non interacting process
and 3) Interacting process. The observed step response of the tank level in different mode can be compared with mathematically predicted response. Setup consists of supply tank, pump for water circulation, Rotameter for flow
measurement, process tanks with scales, which can be connected to interacting and non-interacting mode. The components are assembled on frame to form tabletop set-up.
Additional Information:
Product Details:
Minimum Order Quantity | 1 PIECE |
Material | STAINLESS STEEL |
Model Name/Number | IRE-IPT-2 |
Usage/Application | Industrial Use |
Brand | INNOVATIVE RESERACH EQUUIPMENT |
Compressor | Hermitically sealed compressor |
Warranty | 1 YEAR |
Surface Finish | 1.0M X 1M |
Voltage | 220V |
I Deal In | New Only |
Country of Origin | Made in India |
The unit enables the students to study the Basic Principals of ice plant cycle within a short period. The test rig is designed for the study of thermodynamics of vapour Compression refrigeration cycle by way of demonstration and experimentation. It has a facility to measure various parameters for experimentation. Ice cans are kept in liquid tank, which is cooled by the refrigerant evaporator. As conventional ice plants take 12-24 hours to complete the cycle, this ice plant is specially designed to demonstrate process of ice formation to be complete within period of 4 hours and hence it is most suitable for laboratory use.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Laboratory |
Brand | INNOVATION RESEARCH EQUIPMENT |
Model Name/Number | IRE-MGA-55 |
Disc Diameter | 300 mm x 10 mm |
Frequency | NA |
Motor Power | Variable speed of standard make |
Phase | SINGLE |
Voltage | 220V |
Country of Origin | Made in India |
TECHNICAL DESCRIPTION:
The set up consists of stainless steel disc mounted on a horizontal shaft, rotated by a variable speed motor. The rotor shaft is coupled to a motor mounted on a trunion frame having bearings in a yoke frame, which is free to rotate about vertical axis. A weight pan on other side of disc balances the weight of motor. Rotor disc can be move about three axis. Torque can be applied by calculating the weight and distance of weight from the centre of rotor. The gyroscopic couple can be determined.
Additional Information: